Visit
Official Website
0

Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
+603-5638 9940

Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com

Sabah Branch Office
Hanna Instruments (M) Sdn Bhd

No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com


*HI3827 Boiler and Feedwater Chemical Test Kit

Previous 57 / 89 Next

Quantity
Add Quotation


The HI3827 is a chemical test kit that measures six common parameters in boiler and feedwater: alkalinity, chloride, hardness, pH, phosphate, and sulfite. This kit is equipped with all the necessary reagents and equipment to perform over 100 tests for each parameter, with the exception of phosphate, which includes reagents for 50 tests. pH is obtained with Hanna‘s pHep®, pH electronic tester, which guarantees greater accuracy and a longer life than traditional litmus paper.

  • Pre-made reagents for ease of use
  • All reagents marked with expiration date and lot number for traceability
  • Portable carrying case for easy transport

The HI3827 is a chemical test kit that determines that uses titration, colorimetry, and direct measurement to measure six parameters common to boilers and feedwater testing: alkalinity, chloride, hardness, phosphate, pH, and sulfite. The HI3827 is supplied with all of the necessary reagents and equipment to perform each analysis, and all reagents are individually available as they run out.

Features at-a-glance

  • Complete setup

    • All required materials are included with the test kit, such as the pH tester, sample beaker, indicator and reagent bottles and packets, and color comparison cube.

  • High resolution

    • All tests provide a high resolution based on the expected range of measurement.

  • Replacement reagents available

    • There is no need to buy a new kit when reagents are exhausted. The reagents for each parameter can be ordered individually.



Significance of Use

Monitoring the alkalinity, chloride, hardness, phosphate, pH, and sulfite concentrations in boiler and feedwater is essential in preventing hazardous or costly situations. These parameters are important in determining the corrosive characteristics of water due to carbonates and chloride. Sulfite is also critical to prevent pitting and oxidation of metal components. A high level of sulfite results in a lowered pH, which can also promote corrosion.

 

 

More Information
SKU HI3827
Product Name Boiler and Feedwater Chemical Test Kit - HI3827
Quote Required Yes
pH Measurement Type electronic pH tester
pH Range 0.0 to 14.0 pH
pH Resolution 0.1 pH
pH Accuracy ±0.1 pH
pH Calibration manual, two points
pH Number of Tests life of the meter
Alkalinity Measurement Type titration
Alkalinity Range 0 to 100 mg/L CaCO₃; 0 to 300 mg/L CaCO₃
Alkalinity Resolution 1 mg/L (0 to 100 mg/L range); 3 mg/L (0 to 300 mg/L range)
Alkalinity Method phenolphthalein / bromophenol blue
Alkalinity Number of Test 110
Chloride Measurement Type titration
Chloride Range 0 to 100 mg/L Cl⁻; 0 to 1000 mg/L Cl⁻
Chloride Resolution 1 mg/L (0 to 100 mg/L range); 10 mg/L (0 to 1000 mg/L range)
Chloride Method mercuric nitrate
Chloride Number of Tests 110
Hardness, Total Measurement Type titration
Hardness, Total Range 0.0 to 30.0 mg/L CaCO₃; 0 to 300 mg/L CaCO₃
Hardness, Total Resolution 0.3 mg/L (0.0 to 30.0 mg/L range); 3 mg/L (0 to 300 mg/L range)
Hardness, Total Method EDTA
Hardness, Total Number of Tests 100
Phosphate Measurement Type colorimetric
Phosphate Range 0 to 5 mg/L PO₄³⁻
Phosphate Resolution 1 mg/L
Phosphate Method ascorbic acid
Phosphate Number of Test 50
Sulfite Measurement Type titration
Sulfite Range 0.0 to 20.0 mg/L Na₂SO₃; 0 to 200 mg/L Na₂SO₃
Sulfite Resolution 0.2 mg/L (0.0 to 20.0 mg/L range); 2 mg/L (0 to 200 mg/L range)
Sulfite Method iodometric
Sulfite Number of Tests 110
Weight 2.2 kg (4.8 lb)
Dimensions 440 x 330 x 100 mm (17.3 x 13.0 x 3.9’’)
Ordering Information HI3827 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of phosphate, which includes reagents for 50 tests, hard carrying case, and instructions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
Recent Updates
Subscribe Newsletter